|
D945Gnt |
|
Form Factor |
ATX (12.00 inches by 9.60 inches [304.80 mm by 243.84 mm]) |
|
Processors |
- Support for an Intel® Pentium® D Processor in an LGA775 socket with an 800 MHz system bus
- Support for an Intel® Pentium® 4 Processor in an LGA775 socket with an 800 MHz system bus
- Support for an Intel® Celeron® D Processor in an LGA775 socket with a 533 MHz system bus
|
| Memory |
- Four 240-pin DDR2 SDRAM DIMM sockets
- Support for DDR2 667, DDR2 533, or DDR2 400 MHz DIMMs
- Support for up to 4 GB of system memory
|
|
Chipset |
Intel® 945G Express Chipset |
|
Legacy I/O Control |
Legacy I/O controller for diskette drive, serial, parallel, and PS/2* ports |
|
Audio |
Intel® High Definition Audio subsystem in one of the following configurations:
- 8-channel (7.1) audio subsystem with five analog audio outputs and one S/PDIF optical digital audio output using the Sigmatel 9223* audio codec
- 6-channel (5.1) audio subsystem with three analog audio outputs using the Sigmatel 9220* audio codec
|
|
Video |
Intel® GMA 950 onboard graphics subsystem |
|
USB |
Support for USB 2.0 devices |
|
LAN Support |
The board provides one of the following:
- Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the Intel® 82573E/82573V/82574V Gigabit Ethernet Controller One serial port
- 10/100 Mbits/sec LAN subsystem using the Intel® 82562GX/82562GZ PLC device
|
|
Peripheral Interfaces |
- Eight USB 2.0 ports
- One serial port
- One parallel port
- Four Serial ATA interfaces
- One parallel ATA IDE interface with UDMA 33, ATA-66/100 support
- One diskette drive interface
- PS/2 keyboard and mouse ports
|
|
Expansion Capabilities |
The board provides one of the following:
- Four PCI Conventional* bus connectors
- Two PCI Express* x1 bus add-in card connectors
- One PCI Express x16 bus add-in card connector
|